Model and Capacity of Sand Making Machine

When sizing up aggregate crushing lines across China, ’s sand makers dominate the domestic market year in and year out thanks to steady output and heavy-duty wear-resistant build. Its lineup falls into four core ranges: standard VSI series, upgraded VSI5X, latest-gen VSI6X, plus full-set VU tower-type dry sand processing system. Every model comes with tiered production rates to fit small, medium and large aggregate plants, handling feedstock including river pebble, granite, limestone, basalt and construction waste; raw feed size is capped below 50 mm in regular operation.

The original classic VSI lineup is a proven workhorse from , available in four core specs: 7611, 8518, 9526 and 1140. Two feeding modes are optional: full centre feed or cascade plus centre feed, with hourly throughput ranging from 60 to 520 tons per unit. The compact 7611 hits 60–90 t/h under full centre feed and jumps to 120–180 t/h with cascade feeding; top-spec 1140 can crank out over 500 tons hourly at full load. Widely installed for aggregate shaping and small-scale sand production at regional quarries, it switches freely between rock-on-rock and rock-on-iron crushing modes, paired with thin oil lubrication for nonstop round-the-clock running, making it a top pick for township-level sand production lines.

Built off original VSI design, VSI5X gets upgraded impellers and crushing chambers in four sizes:7615, 8522, 9532, 1145. Its output runs 70–640 tons per hour, with over 30% higher crushing efficiency and 40% less wear on consumable spare parts compared to first-gen VSI. Fitted with hydraulic opening cover, operators swap hammers and liner plates without tearing down the whole machine, cutting downtime drastically. It’s the go-to unit for mid-to-large stationary crushing plants and the preferred option for tough hard rock like granite, extensively deployed on aggregate lines for China’s highway infrastructure projects.

VSI6X is ’s flagship new release in recent years, covering five models:8018, 9026, 1040, 1150, 1263. Redesigned four-port impeller breaks old structural limits, delivering 100–583 tons hourly. It boasts higher sand yield than older generations, producing well-rounded finished sand with consistent grading that meets China’s national high-quality sand criteria. Refined sealed housing eliminates oil leaks, with built-in lifting lugs prefabricated on the frame. Bulk orders pour in for mobile field crushing lines and large open-pit mines, and this machine is standard equipment for aggregate processing at hydropower and high-speed rail key projects.

The modular enclosed VU tower dry sand plant is an all-in-one intelligent unit focused on eco-friendly dry-process sand making, offered in three mainstream configurations: VU70, VU120, VU170. VU70 turns out 55–65 tons of finished sand hourly, VU120 hits 95–110 t/h while VU170 delivers 140–155 t/h. Manufacturers tweak stone dust content flexibly between 3% and 15%, and fully enclosed dust collection complies with strict environmental regulations.